STM32H7系列再添新成员,这次是高性能微控制来了
来了,老铁!混合信号 + 高性能双杀!NUCLEO-G564RE & H7P5II 试用马上来
【2026.11.07】每日签到:STM32H735G-DK评测、Coremark跑分结果显示在LCD
【2026.10.31】每日签到:STM32H735G-DK评测.TouchGFX在LCD—text中显示动态字符
【2026.11.1】每日签到:STM32H735G-DK评测.接收串口字符并显示在LCD—text中
STM32H747的四线SPI(QUADSPI)是否支持slave模式?
[STM32H735G-DK评测]tocuchGFX中的时钟时针和秒针在MDK中丢失了
【2026.10.18】每日签到:STM32H735G-DK评测.接收串口字符并显示在LCD—text中
【2026.10.17】每日签到:STM32H735G-DK评测.TouchGFX在LCD—text中显示动态字符
使用STM32H743IIT6,读写MCU内部Flash固定地址与固定长度的区域,出现随机性HardFault错误,请问是什么原因?
微信公众号
手机版
OTG模块的DM DP支持软件动态配置上下拉。
DP/DM integrated pull-up and pull-down resistors controlled by the OTG_HS core
depending on the current role of the device. As a peripheral, it enables the DP pull-up
resistor to signal full-speed peripheral connections as soon as VBUS is sensed to be at
a valid level (B-session valid). In host mode, pull-down resistors are enabled on both
DP/DM. Pull-up and pull-down resistors are dynamically switched when the peripheral
role is changed via the host negotiation protocol (HNP).
<br /> <br />
请问是不是使用内部的usb控制器就可以内部上下拉,使用外部的还是要自己加上下拉电路