使用CubeIDE编译任意工程，出现ERROR:87，编译过程工具链编译.OBJ文件参数错误，已经重装过CubeIDE,问题依旧存在。有什么解决办法码

错误代码

make -j16 all

arm-none-eabi-gcc "../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c" -mcpu=cortex-m4 -std=gnu11 -g3 -DDEBUG -DUSE_HAL_DRIVER -DSTM32F401xE -c -I../Core/Inc -I../Drivers/STM32F4xx_HAL_Driver/Inc -I../Drivers/STM32F4xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F4xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.d" -MT"Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.o" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o "Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.o"

process_begin: CreateProcessW(C:\SoftWore\STM32_Cube_IDE\STM32CubeIDE\plugins\com.st.stm32cube.ide.mcu.externaltools.make.win32_2.1.300.202402091052\tools\bin\sh.exe, C:/SoftWore/STM32_Cube_IDE/STM32CubeIDE/plugins/com.st.stm32cube.ide.mcu.externaltools.make.win32_2.1.300.202402091052/tools/bin/sh.exe -c "arm-none-eabi-gcc \"../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c\" -mcpu=cortex-m4 -std=gnu11 -g3 -DDEBUG -DUSE_HAL_DRIVER -DSTM32F401xE -c -I../Core/Inc -I../Drivers/STM32F4xx_HAL_Driver/Inc -I../Drivers/STM32F4xx_HAL_Driver/Inc/Legacy -I../Drivers/CMSIS/Device/ST/STM32F4xx/Include -I../Drivers/CMSIS/Include -O0 -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF\"Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.d\" -MT\"Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.o\" --specs=nano.specs -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb -o \"Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.o\"", ...) failed.

make (e=87): 参数错误。

make: *** [Drivers/STM32F4xx_HAL_Driver/Src/subdir.mk:64: Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.o] Error 87

"make -j16 all" terminated with exit code 2. Build might be incomplete.

error 87往往是配置方面问题，路径啊、格式啊这些。


检查下路径中是否存在特别字符、空格啊、中文字符之类的。另外，可能的话路径也别弄得太深不见底。呵呵