<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>ST意法半导体中文论坛 - STM32</title>
    <link>https://shequ.stmicroelectronics.cn/forum-244-1.html</link>
    <description>Latest 20 threads of STM32</description>
    <copyright>Copyright(C) ST意法半导体中文论坛</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Thu, 16 Apr 2026 18:25:53 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>https://shequ.stmicroelectronics.cn/static/image/common/logo_88_31.gif</url>
      <title>ST意法半导体中文论坛</title>
      <link>https://shequ.stmicroelectronics.cn/</link>
    </image>
    <item>
      <title>STM32U5A9J-DK 当U盘使用，插电脑上无反应</title>
      <link>https://shequ.stmicroelectronics.cn/thread-868373-1-1.html</link>
      <description><![CDATA[]]></description>
      <category>STM32</category>
      <author>Tod_</author>
      <pubDate>Fri, 29 Aug 2025 08:34:15 +0000</pubDate>
    </item>
    <item>
      <title>0.96寸OLED，本来应该每帧8页，现在却只有4页</title>
      <link>https://shequ.stmicroelectronics.cn/thread-642882-1-1.html</link>
      <description><![CDATA[[md]![1dbfef7014f133fe681ea7bf0bfaf9b.jpg](data/attachment/forum/202404/06/131358q261nzkp4g10x56x.jpg?imageMogr2/auto-orient/strip%7CimageView2/2/w/300 \&quot;1dbfef7014f133fe681ea7bf0bfaf9b.jpg\&quot;)

本来每页应该是8行，现在却足足有16行，请问如何更改（所用为s ...]]></description>
      <category>STM32</category>
      <author>s1f</author>
      <pubDate>Sat, 06 Apr 2024 05:15:09 +0000</pubDate>
    </item>
    <item>
      <title>关于驱动L9663 PSI5收发器的SPI时序问题</title>
      <link>https://shequ.stmicroelectronics.cn/thread-642168-1-1.html</link>
      <description><![CDATA[[md]我在使用STM32f4xx系列的芯片通过SPI与L9663芯片进行通信，我遇到一些通信时序上的疑惑如下：


例如，如果我想将 0x0443 写入地址为 0x02 的寄存器 CHCNT，我将发送帧的格式是如下所示吗

：0x02 0x80 0x88 0x68（根据格式化规则）。


恳请大家解答一下我的疑惑， ...]]></description>
      <category>STM32</category>
      <author>只有人类才会失眠</author>
      <pubDate>Wed, 17 Jan 2024 11:13:03 +0000</pubDate>
    </item>
    <item>
      <title>Error[Pe147]: declaration is incompatible with &quot;__nounwind __interwork __so</title>
      <link>https://shequ.stmicroelectronics.cn/thread-634045-1-1.html</link>
      <description><![CDATA[[md]用的IAR编译器编译的，总是报错这个，我网上找了说是core_cm3.c与IAR版本不符合。我尝试下载了最新的固件库文件，替换以前的，依旧是这样的报错，请问怎么解决，我有去把core_cm3.c和.c删除，使用IAR的CMSIS，但有新的报错。![屏幕截图2022-03-28153625.png](data/a ...]]></description>
      <category>STM32</category>
      <author>chensi</author>
      <pubDate>Mon, 28 Mar 2022 08:40:01 +0000</pubDate>
    </item>
    <item>
      <title>ST MCU芯片的VCAP管脚话题</title>
      <link>https://shequ.stmicroelectronics.cn/thread-629254-1-1.html</link>
      <description><![CDATA[ST MCU芯片的VCAP管脚话题
  用过STM8s芯片的人都会有印象，芯片上都有个VCAP脚，他需要外接一个电容到地。目的是为了保证内部主调压器的电压稳定。数据手册里也给出这个电容的相关参考参数。

 
如果这个地方不接电容或者参数或位置过于随意，调试、烧录往往会有问题。 ...]]></description>
      <category>STM32</category>
      <author>STMCU小助手</author>
      <pubDate>Mon, 01 Mar 2021 02:30:29 +0000</pubDate>
    </item>
    <item>
      <title>如何使STM32F412RET PC9输出I2S MCLK</title>
      <link>https://shequ.stmicroelectronics.cn/thread-629082-1-1.html</link>
      <description><![CDATA[关键字： I2S  MCLK  主时钟  STM32F412RET
      各位大师请教下，我这边使用STM32F412RET+DA7218,需要STM32送出I2S主时钟给DA7218, 目前线路留的是PC9这个GPIO，但我在STM32CubeMX的STM32F412RET的PC9找不到有I2S MCLK选项（如附件截图）。我们在一台客户的对比机STM3 ...]]></description>
      <category>STM32</category>
      <author>u18650436001</author>
      <pubDate>Tue, 16 Feb 2021 10:30:36 +0000</pubDate>
    </item>
    <item>
      <title>stm32 PWM 输出电压问题</title>
      <link>https://shequ.stmicroelectronics.cn/thread-629033-1-1.html</link>
      <description><![CDATA[我使用的单片版为STM32F446RE。设定Tim2的Channel1为PWM输出。設定如下：
APB1 Timer clocks 設定為72M，
Clock Source Internal Clock
Channel1: PWM Generation CH1(PA0)

Prescaler:71 
Counter Mode: Up
Counter Period: 999
Internal Clock Division: No Division
 ...]]></description>
      <category>STM32</category>
      <author>Leon_Su</author>
      <pubDate>Sat, 06 Feb 2021 08:24:22 +0000</pubDate>
    </item>
    <item>
      <title>STM32CubeMX F4xx USB-CDC例程，GCC踩坑</title>
      <link>https://shequ.stmicroelectronics.cn/thread-628658-1-1.html</link>
      <description><![CDATA[因为移植一包STM32的程序，要用到USB-CDC功能，和arm-none-eabi-gcc编译器。随发现STM32CubeMX产生的CDC底包，在STM32F4xx上面，有问题。 先看看问题：

用STM32CubeMX，开一套F407的CDC（VCP）程序，分别用MDK和SW4STM32产生底包。
只加了一条打印语句CDC_TransmitFS() ...]]></description>
      <category>STM32</category>
      <author>radio2radio</author>
      <pubDate>Wed, 13 Jan 2021 11:34:23 +0000</pubDate>
    </item>
    <item>
      <title>STM32 USB 虚拟串口 华为EM909s(4G无线模块) PPP拨号 高速联接...</title>
      <link>https://shequ.stmicroelectronics.cn/thread-628172-1-1.html</link>
      <description><![CDATA[在STM32F407的USB(OTG/HOST)口上，已开发成功开发虚拟串口Host驱动程序，可在USB OTG口上虚拟出1~2个串行口出来。该驱动程序可连续各类USB接口设备，比如：STM32F407通过USB(HOST)接口与华为EM909s(4G无线调制解调器设备)联接，在LWIP协议栈上，实现高速PPP拨号上网等功 ...]]></description>
      <category>STM32</category>
      <author>w15970081761</author>
      <pubDate>Thu, 10 Dec 2020 14:17:04 +0000</pubDate>
    </item>
    <item>
      <title>f767,定时器无法正常触发三重ADC交替采集模式</title>
      <link>https://shequ.stmicroelectronics.cn/thread-627926-1-1.html</link>
      <description><![CDATA[想要利用cube配置定时器2触发三重ADC交替触发模式，但是ADC没有正常触发。应该就只有ADC1触发了一次，ADC2.3都没有正常触发。求大佬们分享相关经验  

会不会是三重交替模式下不能使用定时器触发？
 ...]]></description>
      <category>STM32</category>
      <author>llltttao</author>
      <pubDate>Wed, 25 Nov 2020 06:21:31 +0000</pubDate>
    </item>
    <item>
      <title>1.使用STM32F100RCT6 直接替代STM32F100RBT6 是否有问题？</title>
      <link>https://shequ.stmicroelectronics.cn/thread-627746-1-1.html</link>
      <description><![CDATA[1. 由于缺货，现货找到一批STM32F100RCT6 ，想直接替代 STM32F100RBT6 , 硬件软件均不更改。
2. 核查了一下，硬件引脚 PIN-TO-PIN 兼容，RB 有的功能，RC 均有，RC FLASH, RAM 均大一些，多2路串口5个定时器。其它外设一致。
3. 核对了一下启动文件STM32F100RBT6 应当要 ...]]></description>
      <category>STM32</category>
      <author>kaoyao66</author>
      <pubDate>Thu, 12 Nov 2020 09:27:50 +0000</pubDate>
    </item>
    <item>
      <title>STM32 G474 I2C4初始化问题</title>
      <link>https://shequ.stmicroelectronics.cn/thread-626956-1-1.html</link>
      <description><![CDATA[请教各位大神，我刚刚开始学习STM32，使用的是STM32G474RE的测试板环境，I2C初始化还搞不太清楚。我使用LL的测试例子I2C_OneBoard_Communication_IT，I2C3初始化后可以正常使用。我把代码改成I2C4之后发现对应的PC6和PC7脚好像都没有初始化成功，现象是初始化后，PC6和P ...]]></description>
      <category>STM32</category>
      <author>forrestlam</author>
      <pubDate>Thu, 17 Sep 2020 02:46:49 +0000</pubDate>
    </item>
    <item>
      <title>分享tle的驱动</title>
      <link>https://shequ.stmicroelectronics.cn/thread-626842-1-1.html</link>
      <description><![CDATA[分享给大家角度传感器TLE5012B]]></description>
      <category>STM32</category>
      <author>poalris001</author>
      <pubDate>Thu, 10 Sep 2020 02:50:43 +0000</pubDate>
    </item>
    <item>
      <title>STM32F2 器件 -25° 上电正常 复位就挂了</title>
      <link>https://shequ.stmicroelectronics.cn/thread-626827-1-1.html</link>
      <description><![CDATA[最近做的板子，常温时都运行正常断电低温-25°保持2小时后上电正常工作，但是一旦操作重置（硬件重置按键或软件重置）就会起不来，一直卡死STM32F205，外部晶振8M内部主频倍频后120M，开启了CSS 

RCC初始化：
void  SystemClock_Config（void）
{ 
  RCC_OscInitTypeDe ...]]></description>
      <category>STM32</category>
      <author>KEY1</author>
      <pubDate>Wed, 09 Sep 2020 10:05:27 +0000</pubDate>
    </item>
    <item>
      <title>输入捕获 error:  #53: expected a &quot;:&quot; __HAL_TIM_SET_CAPTUREPOLARITY...</title>
      <link>https://shequ.stmicroelectronics.cn/thread-626798-1-1.html</link>
      <description><![CDATA[该问题 1.8.0 和 1.8.1 库中均存在。

在使用 HAL 的 __HAL_TIM_SET_CAPTUREPOLARITY 函数时出现如下错误：


按 F12 Go To Definition Of ... 发现该函数的定义如下：



再 Go To Definition Of \'TIM_RESET_CAPTUREPOLARITY\' 发现问题



结论：明显是多了一个括号引 ...]]></description>
      <category>STM32</category>
      <author>luhua2018</author>
      <pubDate>Tue, 08 Sep 2020 08:43:52 +0000</pubDate>
    </item>
    <item>
      <title>STM32F407定时器低频时对的，设置成高频就有问题了</title>
      <link>https://shequ.stmicroelectronics.cn/thread-626604-1-1.html</link>
      <description><![CDATA[在调试定时器产生高频的方波的时候，我使用的方法时在定时器里直接翻转，设置4M的方波时候频率是对的，但是再高频率就不是按照分频的比例来了，这种问题可能时由于什么原因导致的呢？还是本身stm32就不能支持这么十几兆的软件控制翻转呢、还有顺便请教一下，大家之前测 ...]]></description>
      <category>STM32</category>
      <author>xiangnan949</author>
      <pubDate>Thu, 27 Aug 2020 09:54:16 +0000</pubDate>
    </item>
    <item>
      <title>STM32F407定时器初始化Prescaler和Period是不是不能同时设置成0...</title>
      <link>https://shequ.stmicroelectronics.cn/thread-626424-1-1.html</link>
      <description><![CDATA[调试STM32F407定时器timer1，现在APB2调成了168M,我想让timer1每个周期都进中断，所以就把Prescaler和Period都设置成0了，用下面这个公式：
f=tck/(psc+1)*(arr+1)
tck为时钟频率，psc为时钟预分频系数，arr为自动重装载值;
理论上应该是可以的，但是发现这样设置每次都 ...]]></description>
      <category>STM32</category>
      <author>xiangnan949</author>
      <pubDate>Fri, 14 Aug 2020 07:01:21 +0000</pubDate>
    </item>
    <item>
      <title>串口接收用RTOS中任务轮询接收会丢数据吗？</title>
      <link>https://shequ.stmicroelectronics.cn/thread-626405-1-1.html</link>
      <description><![CDATA[项目中用到 串口通讯 与 I2C总线上主从机通讯，
因为考虑到I2C通讯很可能会被串口接收中断给打断，
所以正在考虑 串口接收从原来的接收中断方式 改为 在FreeRTOS中独立一个任务轮询接收数据，波特率是115200
考虑到可能会丢失串口数据，希望有这么干过的大佬能指点一下 ...]]></description>
      <category>STM32</category>
      <author>奏奏奏</author>
      <pubDate>Thu, 13 Aug 2020 11:44:57 +0000</pubDate>
    </item>
    <item>
      <title>cubeMX配置lwip后为社么ETH的RX_MODE 不能选择中断？</title>
      <link>https://shequ.stmicroelectronics.cn/thread-626403-1-1.html</link>
      <description><![CDATA[cubeMX配置lwip后为社么ETH的RX_MODE 不能选择中断？为什么只能轮询接收，不能中断接收呢，想用中断接收怎么改呢？]]></description>
      <category>STM32</category>
      <author>三尘居士</author>
      <pubDate>Thu, 13 Aug 2020 08:47:00 +0000</pubDate>
    </item>
    <item>
      <title>GPIO配置上拉/下拉的实际意义？</title>
      <link>https://shequ.stmicroelectronics.cn/thread-626338-1-1.html</link>
      <description><![CDATA[项目中硬件工程师在电路板设计的时候在模拟I2C总线上的2个IO口都忘记加上拉电阻，
我这个时候就发现自己有个最基础的知识没有搞懂：
STM32的GPIO引脚初始化的时候要配置选择：无上拉无下拉，上拉，下拉
这个实际意义是属于下面的哪一种？
（1）STM32芯片内部有上拉电阻 ...]]></description>
      <category>STM32</category>
      <author>奏奏奏</author>
      <pubDate>Sun, 09 Aug 2020 10:33:04 +0000</pubDate>
    </item>
  </channel>
</rss>