用文本编辑器打开软件自动生成的调试配置文件，它是位于<工程名>/SW4STM32/<工程名 Configuration>文件夹下的一个.cfg文件，它的内容通常类似于以下内容：1. # This is an Example board with a singleSTM32F407ZETx chip.2. # Generated by System Workbench forSTM323. 4. source [find interface/stlink-v2.cfg]5. 6. set WORKAREASIZE 0x200007. transport select "hla_jtag"8. set CPUTAPID 0x4ba004779. 10. source [find target/stm32f4x_stlink.cfg]11. 12. # use hardware reset, connect underreset13. reset_config srst_only srst_nogate将其改成类似下面的内容：1. # This is an Example board with a singleSTM32F407ZETx chip.2. # Generated by System Workbench forSTM323. 4. source [find interface/jlink.cfg]5. 6. set WORKAREASIZE 0x200007. # transport select "hla_jtag"8. set CPUTAPID 0x4ba004779. 10. source [find target/stm32f4x.cfg]11. 12. # use hardware reset, connect underreset13. reset_config srst_only srst_nogate即将第4行的stlink-v2改成jlink；将第7行注释掉；将第10行的_stlink删掉。这样就可以了。
