帮朋友修改一段代码，但是他只发了一些函数过来，我下载了“IAR Embedded Workbench”，然后建立工程，将芯片设置为“STM8AF6226”，然后编译报错“Please select first the target STM8S/A device used in your application (in stm8s.h file)”；在STM8.H找不到“STM8AF6226”的定义，大侠们请帮帮忙，帮我编译过去，
 
相关代码如下
 /* #define STM8S208 */      /*!< STM8S High density devices with CAN */
 /* #define STM8S207 */      /*!< STM8S High density devices without CAN */
 /* #define STM8S007 */      /*!< STM8S Value Line High density devices */
 /* #define STM8AF52Ax */    /*!< STM8A High density devices with CAN */
 /* #define STM8AF62Ax */    /*!< STM8A High density devices without CAN */
 /* #define STM8S105 */      /*!< STM8S Medium density devices */
 /* #define STM8S005 */      /*!< STM8S Value Line Medium density devices */
 /* #define STM8AF626x */    /*!< STM8A Medium density devices */
 /* #define STM8S103 */      /*!< STM8S Low density devices */
 /* #define STM8S003 */      /*!< STM8S Value Line Low density devices */
 /* #define STM8S903 */      /*!< STM8S Low density devices */
 
#if !defined (STM8S208) && !defined (STM8S207) && !defined (STM8S105) && \
    !defined (STM8S103) && !defined (STM8S903) && !defined (STM8AF52Ax) && \
    !defined (STM8AF62Ax) && !defined (STM8AF626x) && !defined (STM8S007) && \
    !defined (STM8S003)&& !defined (STM8S005) 
   
 #error &quotlease select first the target STM8S/A device used in your application (in stm8s.h file)"
#endif

 

你应该用的是下面这个吧。明显头文件不支持6226这个系列，他支持的是626x系列。
/* #define STM8AF626x */    /*!< STM8A Medium density devices */

这样做的意思是不是说给我的这个程序对STM8AF6226编译不过去的？！

有没有支持STM8AF6226硬件库？？

#define STM8AF626x 后
编译报错
Building configuration: sbstcx - Release
Updating build tree...
STM8_EEPROM.c  
Warning[Pa050]: non-native end of line sequence detected (this diagnostic is only issued once) F:\新建文件夹 (2)\stcx\Source\main.h 51
Error[Pe029]: expected an expression F:\新建文件夹 (2)\stcx\Source\STM8_EEPROM.c 5
Error[Pe029]: expected an expression F:\新建文件夹 (2)\stcx\Source\STM8_EEPROM.c 14
Error while running C/C++ Compiler
main.c  
Warning[Pa050]: non-native end of line sequence detected (this diagnostic is only issued once) F:\新建文件夹 (2)\stcx\Source\main.h 51
Warning[Pe177]: variable "Data" was declared but never referenced F:\新建文件夹 (2)\stcx\Source\main.c 42
Warning[Pe177]: variable "Address" was declared but never referenced F:\新建文件夹 (2)\stcx\Source\main.c 43
Warning[Pe177]: variable "value_optbyte" was declared but never referenced F:\新建文件夹 (2)\stcx\Source\main.c 44
Warning[Pe177]: variable "value_optbyte_complement" was declared but never referenced F:\新建文件夹 (2)\stcx\Source\main.c 44
Warning[Pe177]: variable "res_value" was declared but never referenced F:\新建文件夹 (2)\stcx\Source\main.c 45
Error[Pe136]: struct "TIM3_struct" has no field "SMCR" F:\新建文件夹 (2)\stcx\Source\main.c 116
Error[Pe020]: identifier "TIM3_SMCR_TS" is undefined F:\新建文件夹 (2)\stcx\Source\main.c 116
Error[Pe136]: struct "TIM3_struct" has no field "SMCR" F:\新建文件夹 (2)\stcx\Source\main.c 117
Error[Pe020]: identifier "TIM3_SMCR_SMS" is undefined F:\新建文件夹 (2)\stcx\Source\main.c 117
Error[Pe136]: struct "TIM3_struct" has no field "SMCR" F:\新建文件夹 (2)\stcx\Source\main.c 118
Error[Pe020]: identifier "TIM3_SMCR_MSM" is undefined F:\新建文件夹 (2)\stcx\Source\main.c 118
Error while running C/C++ Compiler
stm8_interrupt_vector.c  
Warning[Pe375]: declaration requires a typedef name F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 7
Error[Pe169]: expected a declaration F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 7
Error[Pe020]: identifier "interrupt_handler_t" is undefined F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 11
Error[Pe020]: identifier "interrupt_handler_t" is undefined F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 15
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 15
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 16
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 17
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 18
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 19
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 20
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 21
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 22
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 23
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 24
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 33
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 34
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 36
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 37
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 38
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 45
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 46
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 51
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 52
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 59
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 60
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 65
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 72
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 73
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 83
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 90
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 92
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 93
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 94
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 95
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 96
Error[Pe067]: expected a "}" F:\新建文件夹 (2)\stcx\Source\stm8_interrupt_vector.c 97
Error while running C/C++ Compiler

Total number of errors: 43
Total number of warnings: 8

在“stm8_interrupt_vector.c”里找到其中一句报错得代码“typedef void @far (*interrupt_handler_t)(void);”
然后我在“STM8S.H”里找“@far”的定义，
#ifdef _COSMIC_
#define FAR  @far
#define NEAR @near
#define TINY @tiny
#define EEPROM @eeprom
#define CONST  const
#elif defined (_RAISONANCE_) /* __RCST7__ */
#define FAR  far
#define NEAR data
#define TINY page0
#define EEPROM eeprom
#define CONST  code
#if defined (STM8S208) || defined (STM8S207) || defined (STM8S007) || defined (STM8AF52Ax) || \
     defined (STM8AF62Ax)
   /*!< Used with memory Models for code higher than 64K */
  #define MEMCPY fmemcpy
#else /* STM8S903, STM8S103, STM8S003, STM8S105, STM8AF626x */
  /*!< Used with memory Models for code less than 64K */
  #define MEMCPY memcpy
#endif /* STM8S208 or STM8S207 or STM8S007 or STM8AF62Ax or STM8AF52Ax */
#else /*_IAR_*/
#define FAR  __far
#define NEAR __near
#define TINY __tiny
#define EEPROM __eeprom
#define CONST  const
#endif /* __CSMC__ */
我现在用的是IAR编译，是不是说只能用COSMIC编译？？

我找找看有没有对应的库。

我看了一下，定义就是用626x，这些错误你应该看一下对应报错的位置，查一下错误的原因。很可能是语法的错误。