|
有智林板的可以把所有文件考到一个目录下边,工程非常简单只包括三个文件 main.C//主文件 TFT018.c//显示有关文件 STM32F10XR.LIB//这个文件在MDK目录下边很好找 智林开发板板载上,下,左,右,方向键,若直接按,就是OK,本程序只是设置好上拉电阻输入就行, 运行时可即时显示用户的按键,本例有HEX可直接下载到芯片里边 QQ群:77219145 以下是主程序: int main(void) { #ifdef DEBUG debug(); #endif /* System Clocks Configuration */ RCC_Configuration(); /* NVIC Configuration */ NVIC_Configuration(); /* GPIO Configuration */ GPIO_Configuration(); /* Time base configuration */ TIM_TimeBaseStructure.TIM_Period = 0x5000; TIM_TimeBaseStructure.TIM_Prescaler = 0x00; TIM_TimeBaseStructure.TIM_ClockDivision = 0x0; TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up; TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure); /* Output Compare Toggle Mode configuration: Channel1 */ TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1; TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable; TIM_OCInitStructure.TIM_Pulse =CCR3_Val ; TIM_OC3Init(TIM2, &TIM_OCInitStructure); /* TIM enable counter */ TIM_Cmd(TIM2, ENABLE); LCD_Init(); LCD_Clear_Screen(Blue); while(1) { for(;;) { Font = 0; LCD_PutString(30,0,"STM32F 开发板",Cyan,Blue); LCD_PutString(30,16,"GPIO 输入演示",Red,Yellow); Font = 1; LCD_PutString(38,32,"Version 1.0",Green,Blue); Font = 0; LCD_PutString(10,94,"智林测控技术研究所",Yellow,Blue); LCD_PutString(36,111,"www.the0.net",Magenta,Blue); if (((GPIOB->IDR & JOYSTICK) == JOYSTICK )) { // Check if JOYSTICK key is pressed GPIOB->ODR &= ~LED; // switch off LED } else { // JOYSTICK key is pressed GPIOB->ODR |= LED; // switch on LED } if (((GPIOB->IDR & UP) == 0 )) // Check if UP is pressed LCD_PutString(48,40,"上",Yellow,Red); else LCD_PutString(48,40,"上",Red,Yellow); if (((GPIOB->IDR & DOWN) == 0 )) // Check if DOWN is pressed LCD_PutString(48,76,"下",Yellow,Red); else LCD_PutString(48,76,"下",Red,Yellow); if (((GPIOB->IDR & LEFT) == 0 )) // Check if LEFT is pressed LCD_PutString(30,58,"左",Yellow,Red); else LCD_PutString(30,58,"左",Red,Yellow); if (((GPIOB->IDR & RIGHT) == 0 )) // Check if RIGHT is pressed LCD_PutString(66,58,"右",Yellow,Red); else LCD_PutString(66,58,"右",Red,Yellow); if (((GPIOB->IDR & OK) == 0 )) // Check if OK is pressed LCD_PutString(48,58,"OK",Yellow,Red); else LCD_PutString(48,58,"OK",Red,Yellow); if (((GPIOC->IDR & BP2) == 0 )) // Check if BP2 is not pressed LCD_PutString(100,40,"BP2",Yellow,Red); else LCD_PutString(100,40,"BP2",Red,Yellow); if (((GPIOA->IDR & BP3) == 0 )) // Check if BP3 is not pressed LCD_PutString(100,76,"BP3",Yellow,Red); else LCD_PutString(100,76,"BP3",Red,Yellow); } } } 
zl9.rar
(21.95 KB, 下载次数: 19)
|
